GP Valve & Actuator Store, Sdn. Bhd.

Soelnoid valves according to NAMUR serve the control of pneumatic actuators and are to be mounted directly on actuators with a NAMUR interface according to VDI/VDE 3845. You can use our monostable solenoid valves of the series MNF for standard applications. Our standard version has a wearless and...

A Gate Valve also known as sluice valve, is a valve that opens by lifting a round or rectangular gate/wedge out of the path of the fluid. Typical gate valves should never be used for regulating flow unless they are specifically designed for that purpose. On opening the gate valve, the flow is...

The "butterfly" is a metal disc mounted on a rod, connected to an actuator on the outside of the valve. Unlike the ball valve, the disc is always present within the flow, therefore a pressure drop is always induced in the flow regardless of valve postition. A butterfly valve is from a family of...

The "butterfly" is a metal disc mounted on a rod, connected to an actuator on the outside of the valve. Unlike the ball valve, the disc is always present within the flow, therefore a pressure drop is always induced in the flow regardless of valve postition. A butterfly valve is from a family of...

A Check Valve, Clack Valve, Non-return Valve or One-way Valve is a mechanical device, a valve which normally allows fluids to flow through it in only one direction. Check Valves are two-port valves, meaning they have two openings in the body, one for fluid to enter and the other for fluid to...

A Check Valve, Clack Valve, Non-return Valve or One-way Valve is a mechanical device, a valve which normally allows fluids to flow through it in only one direction. Check Valves are two-port valves, meaning they have two openings in the body, one for fluid to enter and the other for fluid to...

A Ball Valve is a valve with a spherical disc. The sphere has a hole, or port through the middle so that when the port is in line with both ends of the valve, flow will occur. The handle will be inline with the port position letting you "see" the valve's position.

A Globe Valve is a type of valve used for regulating flow in a pipe line. The body has an opening that forms a seat onto which a movable plug can be screwed in to close or shut the valve. The plug is also called a disc or disk. In globe valves, the plug is connected to a stem which is operated by...

A device that mechanically remove dirts and solids from flowing liquids or gases through perforated metal or wire mesh straining element. This is to prevent the dirts or particals flowing through the valve to protect for example control valves, pumps, measuring equipments, from damage.

2/2-way Normally Closed - Normally OpenGPW Direct Lift from zero pressure, max. 10barForged brass body, NBR seal (options for Viton & EPDM)for air, oil, water, gas etc.